How Much Does it Cost to Insulate an Attic in Port Washington?

$1.7K Cheap
$1.9K Great Price
$2.1K Costly
View Full Cost Chart

There are a lot of insulation types available today. However, when it comes to attic insulation Port Washington, blown-in is the most commonly used. It is estimated that the majority of homeowners spend around $700 up to $1,900 to have an average size or 2,500 square feet attic insulated. If you plan to save costs on labor, you can have your attic insulated by doing it yourself. Expect to spend around $500 to $1,000 for a blown-in insulation that has an R-30 value, $100 to $200 for the equipment needed, and $10 to $25 for the sealant. A DIY Port Washington attic insulation can cost you approximately $600 to $1,300 all in all.

Estimated final cost for attic insulation

Item Quantity Fair Price
Attic Insulation Cost 1282 Square Feet $574.76
Attic Insulation Labor 14 Hours $1,208.60
Attic Insulation Job Materials and Supplies 1200 Square Feet $62.62
Attic Insulation Equipment Allowance $40.85
Totals - Cost to Install Attic Insulation - 1282 Square Feet $1,886.83
Average Cost Per Square Foot $1.57

How long does the attic insulation Port Washington take?

The completion of an attic insulation project depends on the size and design of your attic plus the material to be used. Generally, it can be done in 2 hours or more.

What are the requirements for an attic insulation Port Washington?

Attic insulation requires at least a minimum of R-16 value. This can be achieved by using 300mm roll of blown attic insulation.

Should I have the water pipes and tanks in the attic insulated in Port Washington?

Yes. It is important to keep the water pipes and water tanks located in your attic insulated to keep them from freezing during winter.

Find the Best Costs on Attic Insulation - Port Washington, 11050

If you do not have any knowledge about home insulation installation, have an attic with uneven joist spacing or attic with limited headroom, it is best to hire a professional for your attic insulation Port Washington project. The cost for an insulation project is estimated to be around $1.40 up to $3.60 per square foot. Most contractors charge $70 to $80 per hour. Given these amounts, a 2,500 square feet attic insulation Port Washington that is professionally installed can cost you approximately $1,800 up to $4,600. Keep in mind the cost of your project can fluctuate depending on the size of your attic and geographical location. The labor costs can also change based on your area. Expect to pay higher labor fees if you are living in a city. The type of insulation material can also have an impact on the cost of your project. Cellulose material is around $28 to $30 per bag. Fiberglass is estimated to be around $33 per bag, and mineral wool can be purchased for $55 per roll.

Local pros & Availability

Insulation Contractors available in your area

  • Open
  • Closed
  • 1

    Sound Proof

    Rating: 61
    112 W Boston Post Rd. 
    MamaroneckNY  10543
  • 2

    Accredited Environmental Solutions

    Rating: 78
    156 Shore Rd. 
    Port WashingtonNY  11050
  • 3

    Madeira Drywall

    Rating: 78
    604 Waverly Ave. 
    MamaroneckNY  10543
  • 4

    Nu-Way Insulation, Inc.

    Rating: 91
    1999 Palmer Avenue. 
    LarchmontNY  10538
  • 5

    Cool Jeans of Mount Vernon Limited

    Rating: 60
    60 S 4th Ave. 
    Mount VernonNY  10550
  • 6

    Westchester Insulation Corporation

    Rating: 68
    118 Florence St. 
    MamaroneckNY  10543