How Much Does it Cost to Service Asphalt in Millbrae?

$412 Cheap
$452 Great Price
$493 Costly
View Full Cost Chart

Asphalt is mostly used to pave driveways in many homes. It is affordable and can only cost around $3 to $4 per square foot. Choosing asphalt as a pavement solution is not only economical and practical, but its durability can withstand harsh weather conditions too. Asphalt in Millbrae is mostly used by many homeowners living in cold regions, as compared to concrete, because of its ability to adapt to temperature changes. Concrete, on the other hand, has the tendency to crack when exposed to a temperature below freezing point. This could be very costly to repair for homeowners.

Estimated final cost for asphalt

Item Quantity Fair Price
Driveway Cost 215 Square Feet $180.93
Driveway Labor 2.2 Hours $162.31
Driveway Job Materials and Supplies 200 Square Feet $22.70
Driveway Equipment Allowance $87.22
Totals - Cost to Install Asphaltic Concrete Driveways - 215 Square Feet $453.17
Average Cost Per Square Foot $2.27

Is there any available color for asphalt in Millbrae other than black?

Technically, asphalt is black. When the aggregates or stones are mixed with asphalt cement, the material immediately turns black. As time goes by and as the asphalt starts to oxidize, the aggregate coating will eventually start to break down and the real color of the stone slowly show. This reaction could lead to a grayish color on the asphalt if the manufacturer used light colored aggregate.

Should I wait longer to resurface my entire driveway regardless of whether I can already see visible damages on some portions of my asphalt pavement in Millbrae?

Just like with other parts of your home or property, it will always be cheaper to repair damaged areas of your driveway when they are still minimal. Ignoring them will expose your driveway to bigger damages in the future which can cost you hundreds or thousands of dollars to repair.

How soon can I drive on my new asphalt driveway in Millbrae?

Generally, you can drive on asphalt after 2 to 3 days from the date it was installed. But, you should be careful because the curing period of asphalt is 20 to 30 days.

Find the Best Costs on Asphalt - Millbrae, 94030

Several factors can affect the asphalt installation in your pavement. One of this is the local material cost that is usually determined by the freight and current market price in your area. Millbrae asphalt, when used as pavement, will need to have good drainage which can also add to the cost of the installation. The base coat will also have an impact on the expense. Coats are usually around $1 to $2.50 per square foot. Special top coats and sealants used in asphalt in Millbrae can cost you an additional $1 to $2.5 per square foot for basic top coats and around $3 to $5 for special top coats. Installation of foundation can also add to the overall price of your asphalt project. Installing 8 to 10 inches of gravel below the asphalt can cost around $1 to $2.50 per square foot of the surface area.

Local pros & Availability

Concrete Contractors available in your area

  • Open
  • Closed
  • 1

    Ricky Lipton Concrete

    Rating: 90
    732 Barcelona Drive. 
    MillbraeCA  94030
  • 2

    Rocks Concrete Pumping

    Rating: 87
    119 Mendocino Street. 
    BrisbaneCA  94005
  • 3

    Bill's Concrete Pumping

    Rating: 70
    758 Winchester Dr. 
    BurlingameCA  94010
  • 4

    ALL CONCRETE CONSTRUCTION CO

    Rating: 60
    18 ADRIAN CT. 
    MillbraeCA  94030
  • 5

    Lavu Concrete Construction

    Rating: 90
    320 Paramount Dr. 
    MillbraeCA  94030
  • 6

    Belmonte Concrete Services

    Rating: 57
    851 Burlway Rd. 
    BurlingameCA  94010