How Much Does it Cost to Service Asphalt in Santa Fe Springs?

$404 Cheap
$444 Great Price
$485 Costly
View Full Cost Chart

Asphalt is mostly used to pave driveways in many homes. It is affordable and can only cost around $3 to $4 per square foot. Choosing asphalt as a pavement solution is not only economical and practical, but its durability can withstand harsh weather conditions too. Asphalt in Santa Fe Springs is mostly used by many homeowners living in cold regions, as compared to concrete, because of its ability to adapt to temperature changes. Concrete, on the other hand, has the tendency to crack when exposed to a temperature below freezing point. This could be very costly to repair for homeowners.

Estimated final cost for asphalt

Item Quantity Fair Price
Driveway Cost 215 Square Feet $183.52
Driveway Labor 2.2 Hours $150.00
Driveway Job Materials and Supplies 200 Square Feet $23.03
Driveway Equipment Allowance $88.47
Totals - Cost to Install Asphaltic Concrete Driveways - 215 Square Feet $445.02
Average Cost Per Square Foot $2.22

Is there any available color for asphalt in Santa Fe Springs other than black?

Technically, asphalt is black. When the aggregates or stones are mixed with asphalt cement, the material immediately turns black. As time goes by and as the asphalt starts to oxidize, the aggregate coating will eventually start to break down and the real color of the stone slowly show. This reaction could lead to a grayish color on the asphalt if the manufacturer used light colored aggregate.

Should I wait longer to resurface my entire driveway regardless of whether I can already see visible damages on some portions of my asphalt pavement in Santa Fe Springs?

Just like with other parts of your home or property, it will always be cheaper to repair damaged areas of your driveway when they are still minimal. Ignoring them will expose your driveway to bigger damages in the future which can cost you hundreds or thousands of dollars to repair.

How soon can I drive on my new asphalt driveway in Santa Fe Springs?

Generally, you can drive on asphalt after 2 to 3 days from the date it was installed. But, you should be careful because the curing period of asphalt is 20 to 30 days.

Find the Best Costs on Asphalt - Santa Fe Springs, 90670

Several factors can affect the asphalt installation in your pavement. One of this is the local material cost that is usually determined by the freight and current market price in your area. Santa Fe Springs asphalt, when used as pavement, will need to have good drainage which can also add to the cost of the installation. The base coat will also have an impact on the expense. Coats are usually around $1 to $2.50 per square foot. Special top coats and sealants used in asphalt in Santa Fe Springs can cost you an additional $1 to $2.5 per square foot for basic top coats and around $3 to $5 for special top coats. Installation of foundation can also add to the overall price of your asphalt project. Installing 8 to 10 inches of gravel below the asphalt can cost around $1 to $2.50 per square foot of the surface area.

Local pros & Availability

Concrete Contractors available in your area

  • Open
  • Closed
  • 1

    Concrete Coating

    Rating: 73
    12915 Telegraph Rd. 
    Santa Fe SpringsCA  90670
  • 2

    Hill Concrete Structures

    Rating: 86
    13007 Los Nietos Rd. 
    Santa Fe SpringsCA  90670
  • 3

    Garcia Concrete Contractor

    Rating: 81
    9568 Danby Ave. 
    Santa Fe SpringsCA  90670
  • 4

    Morrison Concrete Inc

    Rating: 93
    14114 Rosecrans Ave. 
    Santa Fe SpringsCA  90670
  • 5

    Accurate Concrete

    Rating: 93
    9515 Santa Fe Springs Rd. 
    Santa Fe SpringsCA  90670
  • 6

    California Hi Tech Floors Inc Dba California Hi Tech Concrete Co

    Rating: 91
    12101 E Lakeland Road. 
    Santa Fe SpringsCA  90670