How Much Does it Cost to Pave Bricks in Stockton?

$5.5K Cheap
$6.0K Great Price
$6.5K Costly
View Full Cost Chart

Brick pavers Stockton can cost between $3 to $20 per square foot. However, its cost can fluctuate depending on the size of the brick, the color, and the design. Rare designs, shapes, and colors tend to be costlier than regular bricks. Red brick pavers can be purchased at $.50 to $6 per brick. Gray colored brick pavers Stockton are estimated to be around $.50 to %12 per brick. Dry laid brick paver patio can cost $18 to $25 per square foot. Clay bricks are around $300 to $800 per pallet. Clay bricks are more superior and are more expensive than concrete stones. When choosing a paver solution for your project, decide on whether you want to save cost on installation or you want to save less in future repairs and replacement.

Estimated final cost for brick pavers

Item Quantity Fair Price
Brick Paver Patio Cost 535 Square Feet $1,836.12
Brick Paver Patio Labor 60.8 Hours $3,959.10
Brick Paver Patio Job Materials and Supplies 500 Square Feet $114.45
Brick Paver Patio Equipment Allowance $71.50
Totals - Cost to Install Brick Paver Patios - 535 Square Feet $5,981.17
Average Cost Per Square Foot $11.96

Can I use brick pavers Stockton around my swimming pool?

Yes. Brick pavers can be used around pools because they are slip and skid resistant. This will make your pool area safer. Water splashes will be absorbed by the sand in the joints and will not pool on the surface. Brick pavers are also a lot cooler to walk in as compared to concrete during summer time.

What are the types of base that can be used in installing brick pavers Stockton?

There are 3 kinds of base that can be utilized depending on the brick paver that you will install. Flexible base is usually composed of gravel, coarse sand or compacted crushed gravel. The semi-rigid base is typically consisting of asphalt concrete. The third one is the rigid base that is from reinforced or non-reinforced concrete slab. It is usually used in mortared brick paving solutions.

Can I install brick pavers Stockton over my existing concrete driveway?

Yes. If the concrete is in good condition, brick pavers can be installed on it. To make sure that it can act as a good foundation, all damages like cracks and holes should be repaired to ensure that the surface is flat.

Find the Best Costs on Brick Pavers - Stockton, 95202

Installation of brick pavers Stockton can cost you between $1000 and $3000 depending on what design, shape and color you use. The pavement, driveway, patio size or location of where you want to install your brick pavers Stockton will also add to the cost of your project. You should also consider the labor cost. Professional installation of brick pavers usually run around $70 to $150 per hour. Preparation of the area before installing the brick pavers can also add to the expense of installing brick pavers Stockton. Preparation usually involves grass removal, leveling dirt, laying out the edges and pouring of gravel foundation. To save cost on preparation, try to do them on your own if you have the time.

Local pros & Availability

Concrete, Brick & Stone Companies available in your area

  • Open
  • Closed
  • 1

    William F Saiers Co Masonry Contractor

    Rating: 77
    2812 Bonnie Brook. 
    StocktonCA  95207
  • 2

    PENGILLY MASONRY INC

    Rating: 57
    7500 WEST LN. 
    StocktonCA  95210
  • 3

    SPRUNG MASONRY

    Rating: 58
    2950 RALEIGH DR. 
    StocktonCA  95209
  • 4

    Pengilly Masonry Inc

    Rating: 93
    747 Wilshire Ave. 
    StocktonCA  95202
  • 5

    Three Gold Star Concrete

    Rating: 93
    1705 Kyburz Court. 
    StocktonCA  95202
  • 6

    Saiers Masonry

    Rating: 58
    7500 West Ln. 
    StocktonCA  95210