How Much Does it Cost to Service a Trex Deck in Melbourne?

$10.0K Cheap
$10.7K Great Price
$11.4K Costly
View Full Cost Chart

Installing Trex in Melbourne can cost a minimum of $6 up to $9 per square foot and a maximum of $8 up to $11 per square foot, all depending on the location and the Melbourne Trex line to be used. Trex is incredibly flexible. Installations in need of additional railing systems, platforms, equipment, lighting, and standard seats will increase costs and may be included in an add-on bundle separated from the standard Trex installation.

Estimated final cost for trex

Item Quantity Fair Price
Synthetic Decking Cost 1282 Square Feet $9,080.91
Synthetic Decking Labor 42.4 Hours $1,184.88
Synthetic Decking Job Materials and Supplies 1200 Square Feet $386.88
Synthetic Decking Equipment Allowance $58.65
Totals - Cost to Install Synthetic Decking - 1282 Square Feet $10,711.32
Average Cost Per Square Foot $8.93

What is Trex in Melbourne made of?

Trex is manufactured out of 95% recycled supplies. Among them are reclaimed wood and sawdust as well as plastic coming from several standard household objects, like the overwrap on a paper towel packaging and toilet paper, plastic bags, broadsheet bags, shopping and grocery bags. Trex, on a yearly basis, preserves more than 181437 tons of plastic and wood scrap from landfills.

Is it ok to rip a new Melbourne Trex board?

Trex products should not be ripped to lessen thickness. However, they can be ripped to reduce the width. On condition that the plank might still be installed per the assembly instructions, the warranty is going to be valid. Remember to be careful whenever fastening ripped decks, as pre-drilling could possibly be needed.

Is it ok to sand and power wash Trex in Melbourne?

Trex must not be sanded. Sanding will alter the look and safety attributes of the Trex material and will eventually void the warranty regarding any issue as a result of sanding. For the early generation composite decking, Trex doesn't necessarily endorse the utilization of a power washer. Usage of a power washer can harm the decking surface area and often will void the warranty regarding any condition resulting from the power washing.

Is trex zero-maintenance?

Trex decking usually requires less maintenance as compared to wood decking but will need more maintenance to make it look the same over the years. For early generation composite decking, routine cleanup with a deck wash is needed. Trex high-performance decking needs a smaller amount of work. A simple detergent and water cleaning is everything that is necessary to maintain the product.

Find the Best Costs on TREX - Melbourne, 32901

Overall, the total project cost for a new Melbourne Trex deck is estimated to be between $1,500 and $2,200 for a 250 square foot deck. There are three types of Trex that come at different prices. Trex Select that is of essential quality is approximately $7 per square foot. Trex Enhance that has higher quality than Trex Select costs around $8 per square foot. Then there is Trex Transcend, the premium grade among the three types, which costs between $9 per square foot and $10 per square foot.

Local pros & Availability

Carpenters available in your area

  • Open
  • Closed
  • 1

    H & J Concrete Inc

    Rating: 67
    155 E University Blvd. 
    MelbourneFL  32901
  • 2

    Global Engineering Management And Support, Inc.

    Rating: 70
    1050 W Nasa Blvd Ste 135. 
    MelbourneFL  32901
  • 3

    Central Florida Government Resale & Service Llc

    Rating: 62
    907 E Strawbridge Ave. 
    MelbourneFL  32901
  • 4

    Accurate Windows Inc

    Rating: 71
    2920 Bush Dr. 
    MelbourneFL  32935
  • 5

    Chattahoochee Stone by Mike

    Rating: 63
    4115 Aurora Rd. 
    MelbourneFL  32934
  • 6

    Accurate Windows Inc

    Rating: 79
    2920 Bush Dr. 
    MelbourneFL  32901