How Much Does it Cost to Service Cabinet Doors in Glen Carbon?

$8.6K Cheap
$10.2K Great Price
$11.7K Costly
View Full Cost Chart

Cabinet doors in Glen Carbon come in many materials, designs, and prices. A raised panel door for instance, which is the most commonly used, can come in red oak, soft maple, birch, German beech, cherry or bamboo material. A red oak raised panel door can cost $15 to $23 per square foot depending on the design. A soft maple raised panel can cost $20 to $29 per square foot. Bamboo is the most expensive at $32 to $44 per square feet. Flat panel cabinet doors are estimated to be around $13 to $38 per square foot depending on the design and materials used. Slabs are approximately $14 to $37 per square foot. You can also apply finishing to your cabinet doors in Glen Carbon. Clear coat finishing can cost $5.50 to $6.50 per square foot. Stain and clear coat finishing are $9 to $11 per square foot, and paint can cost you $13 to $15 per square foot.

Estimated final cost for cabinet doors

Item Quantity Fair Price
Kitchen Cabinet Cost 54 Linear Feet $4,928.89
Kitchen Cabinet Labor 90.4 Hours $4,031.41
Kitchen Cabinet Job Materials and Supplies 50 Linear Feet $1,159.52
Kitchen Cabinet Equipment Allowance $57.56
Totals - Cost to Replace Cabinet Doors - 54 Linear Feet $10,177.37
Average Cost Per Linear Foot $203.55

Is it possible to just change my cabinet doors without tearing down the whole cabinet in Glen Carbon?

Definitely! Cabinet redooring and refacing are usually done when the cabinet doors are already damaged and broken, or you just simply want to upgrade your kitchen. When you replace your door, you can choose what design or material you want. There are a lot of varieties to choose from.

How long will it take to replace my cabinet doors in Glen Carbon?

The duration of replacing your cabinet doors will depend on the number of doors to be installed, the materials, the accessibility of the cabinets or if there are minor repairs to be made before the installation of the new doors. Typical installation usually takes 3 to 4 hours to accomplish.

Can I have different cabinet doors in Glen Carbon installed on my cabinets?

Absolutely. The design of the cabinet doors and the way they will be installed in your cabinets will depend solely on what you want.

Find the Best Costs on Cabinet Doors - Glen Carbon, 62034

Labor cost of installing cabinet doors in Glen Carbon will be determined by the materials used, the location of the cabinets and the number of doors to be installed. A handyman can charge you $20 to $60 per hour. Professional carpenters may charge $40 to $80 per hour for the job. If you want to save costs on labor, make sure to hire professionals that are serious about taking the job and will not waste time completing it.

Local pros & Availability

Cabinet Installers available in your area

  • Open
  • Closed
  • 1

    Fire Safety Incorporated

    Rating: 62
    PO Box 19. 
    Wood RiverIL  62095
  • 2

    Rks Design

    Rating: 59
    17 Duke Dr. 
    MaryvilleIL  62062
  • 3

    R P Lumber Company Incorporated

    Rating: 60
    3523 State Route 162. 
    Granite CityIL  62040
  • 4

    Franklin Fixtures

    Rating: 57
    673 Mill St. 
    EdwardsvilleIL  62025
  • 5

    Cabinet & Countertop Guy

    Rating: 72
    2902 Marshall Ave. 
    Granite CityIL  62040
  • 6

    R & B Cabinetry & Design

    Rating: 61
    1430 State St. 
    Granite CityIL  62040