The estimated cost of hardwood flooring refinishing in Clinton can be from $3,502 up to $3,819 per 300 square feet. There are some factors that can affect the cost of hardwood flooring refinishing. Some of which are the condition of the floor, quality of finish or coating, number of finishes or coats required, flooring removal and the accessibility of the floor. There are several refinishing and recoating processes available depending on the condition of the floor. There’s a screening that can cost $200 to $250, sanding, staining the hardwood and the finishing or coating. The most popular finishing is the polyurethane that can cost around $40 per gallon for water-based and $25 for the oil based.
Estimated final cost for hardwood flooring refinishing
| Item | Quantity | Fair Price |
|---|---|---|
| Finished Floor Labor | 57.8 Hours | $2,871.09 |
| Finished Floor Job Materials and Supplies | 1200 Square Feet | $739.27 |
| Finished Floor Equipment Allowance | $50.28 | |
| Totals - Cost to Refinish Hardwood Floors - 1282 Square Feet | $3,660.64 | |
| Average Cost Per Square Foot | $3.05 |
How long does it take to refinish hardwood floors in Clinton from start to finish?
The duration of the whole process of hardwood floor refinishing will depend on what type of polyurethane is being used. Normally, oil-based polyurethane often takes 3 to 4 days to be finished plus drying. On the other hand, water based polyurethane only takes about 2 days including the drying time.
Will there be a lot of dust when sanding the floors in Clinton?
Yes. Sanding is a messy process, and sometimes, refinishing contractors offer solutions to this problem. There's a process wherein the dust goes directly in a vacuum bag while vacuuming in between each coat. The other one is a dust extraction system using a vacuum suction tube so the dust can be manipulated to go straight outside into a dust storage system.
What will happen if in Clinton we have pet stains on the floor?
This is a very common issue with homeowners. If there are areas on the floor that have stains or water, the best solution is to have that area replaced and weaved in.
How soon can I walk on my hardwood floors in Clinton after refinishing?
Technically, it is recommended to wait at least 48 hours before replacing the furniture on a newly refinished floor. Very light foot traffic however, can begin after 24 hours after the final coat of finish has been applied. Curing may actually take 2 weeks so it may look like the hardwood finish is dry. Once the curing period is over, rugs can now be replaced on the floor. Regular cleaning and maintenance is the key to keep your hardwood flooring finish shiny. Be sure to only use felt pads under the chair and other furniture to prevent unnecessary scratching.