How Much Does it Cost to Pave Asphalt in Bellevue?

$376 Cheap
$415 Great Price
$454 Costly
View Full Cost Chart

Even though asphalt paving in Bellevue is low cost on, there are still a few factors that can have an impact on the total cost of the project. These factors are the material costs, drainage and geotextile additions, base coat, top coats and sealants, excavation, clearing and the foundation. The material cost is mostly about the market price of fresh asphalt that is affected by fuel and surcharges. Drainage is necessary to enhance the asphalt paving in Bellevue. Typically, a good Bellevue asphalt paving project requires two coats; the base coat and top coat plus the sealant. The base and top coat can cost around $1 to $2.50 per square foot. Sealant, on the other hand, is estimated to cost around $3 to $6 per square foot. Foundation installation which is usually made up of 8 to 10 inches of gravel is around $1 to $3 per square foot.

Estimated final cost for asphalt paving

Item Quantity Fair Price
Driveway Cost 215 Square Feet $184.29
Driveway Labor 2.2 Hours $119.15
Driveway Job Materials and Supplies 200 Square Feet $23.13
Driveway Equipment Allowance $88.84
Totals - Cost to Install Asphaltic Concrete Driveways - 215 Square Feet $415.42
Average Cost Per Square Foot $2.08

What are the different types of asphalt in Bellevue that can be used in pavements?

Various types of asphalt can be used depending on what purpose they will serve. Among the most common types of asphalt are perpetual pavement, porous asphalt, quiet asphalt, warm mix asphalt, and hot mix asphalt.

What is asphalt in Bellevue made of?

Asphalt is a black, sticky, and highly viscous semi-solid form of petroleum. It is composed of four major compounds which are the saturates, naphthene aromatics, polar aromatics, and asphaltenes.

When was Bellevue asphalt first used?

It is said that asphalt has been used since 5th millennium BC in farming. The early Sumerians used natural asphalt in mortars in between stones and bricks, carvings, and for waterproofing purposes.

Find the Best Costs on Asphalt Paving - Bellevue, 68005

Since there are a lot of variables affecting the costs of asphalt paving in Bellevue, obtaining an estimate is difficult unless a homeowner seeks advice from a contractor or professional. There are additional factors that can add to the final expense of Bellevue asphalt paving. Engineering is crucial for the drainage design of the pavement. The cost of hiring a professional engineer to do the drainage plan will depend on the location of the pavement and its topography. Securing a permit from the local authorities together with paying the fees will also affect the cost of the project. Regardless of the cost, however, an asphalt pavement that has been laid with a good foundation, drainage, and material can last up to 20 to 50 years.

Local pros & Availability

Concrete Contractors available in your area

  • Open
  • Closed
  • 1

    Dws Concrete Const., Inc.

    Rating: 71
    1507 Chaput Dr.. 
    BellevueNE  68005
  • 2

    Drive-A-Way Concrete

    Rating: 81
    2103 Pleasantview Ln. 
    BellevueNE  68005
  • 3

    Creative Concrete And Curbing Llc

    Rating: 87
    521 Main St. 
    BellevueNE  68005
  • 4

    A And D Concrete

    Rating: 60
    8709 S 9th. 
    BellevueNE  68147
  • 5

    Ready Mixed Concrete Co

    Rating: 70
    1820 Nebraska 370. 
    BellevueNE  68005
  • 6

    Twin City Masonry & Concrete

    Rating: 69
    508 Waldruh Dr. 
    BellevueNE  68005