Noisy garage doors can be caused by worn rollers, loose hardware, unlubricated parts, broken springs, misaligned tracks, unbalanced doors, opener problems, and improper installation. To stop the noise, you can replace worn rollers, tighten loose hardware, and other strategies.
If you want to get rid of the noise that bothers you every time you open and close the garage doors, you need to know the causes and respective solutions! Read this article from the first to the last section, and you will become a pro at solving loud garage doors.
Why Is My Garage Door So Loud? 8 Causes
Noisy garage doors have several possible culprits: worn rollers, loose hardware, unlubricated parts, broken springs, misaligned tracks, unbalanced doors, opener problems, and even improper installation. Find out how these can cause your garage door to become loud in the list below!
- Worn Rollers: The rollers help the door glide along the tracks. When worn or damaged, the garage door makes a grinding noise when fully closed, particularly for metal rollers.
- Loose Hardware: Over time, the bolts and screws holding the garage door tracks, hinges, and other components can loosen, causing rattling or banging noises.
- Unlubricated Parts: Garage door parts like rollers, hinges, and springs need lubrication. Lack of lubrication can lead to screeching or squeaky garage doors.
- Broken Springs: The torsion or extension springs lift and lower the door. If they are old, broken, or under too much tension, they can cause a loud, popping, or banging sound.
- Misaligned Tracks: If the tracks are not appropriately aligned, the door may struggle to open or close smoothly, causing scraping or grinding noises.
- Unbalanced Door: If the garage door is unbalanced, the opener may strain to lift or lower the door, making more noise than usual.
- Opener Issues: If the opener uses a chain drive, it may become loose or need lubrication, resulting in loud rattling.
- Improper Installation: If the garage door or opener was not installed correctly, it might make more noise due to misalignment or undue strain on components.
Even the most modern garage door options are subject to these sources of annoying sounds; if you want to stop the noise, you have to put an end to these problems. Continue reading to learn exactly how to make your garage door quieter!
How To Fix A Noisy Garage Door?
You must replace worn rollers, tighten loose hardware, lubricate moving parts, replace broken springs, check and align the tracks, balance the garage door, adjust the door opener, and hire qualified contractors to install and repair your garage doors.
1. Replace Worn Rollers
Inspect the rollers to see if they wobble or show signs of cracking or uneven wear. Metal rollers can also be noisy over time, so consider replacing them with quieter nylon rollers, which are smoother and require less maintenance.
2. Tighten Loose Hardware
Inspect all the bolts, screws, and nuts that secure the door tracks, hinges, and brackets. Use a socket wrench or screwdriver to tighten any that are loose. Be careful not to overtighten, as this could strip the threads or damage the parts.
3. Lubricate Moving Parts
Regardless of your garage door style, it most likely has moving parts. Apply a high-quality garage door lubricant or silicone spray to these areas. Be sure to avoid greasing the tracks; instead, focus on the rollers and hinges to prevent dirt buildup, which could worsen the noise.
4. Replace Broken Springs
Broken torsion or extension springs cause a loud banging or popping noise as the door opens or closes. Springs are under a lot of tension, and mishandling them can be hazardous. If you notice your springs are worn or damaged, contact a professional to replace them.
5. Check And Align The Tracks
Observe the tracks on either side of the door and ensure they are straight and aligned. If you notice the tracks are bent or have gaps, loosen the screws holding them in place, gently adjust the tracks back into alignment, and tighten the screws.
6. Balance The Garage Door
You can test the balance by disconnecting the opener and manually lifting the door halfway. It is balanced. If it stays in place, the door is balanced; if it falls, it is unbalanced. An unbalanced door should be fixed by adjusting the tension in the springs, which can be dangerous to do on your own. In this case, it is best to contact a garage door technician.
7. Adjust The Door Opener
If the opener is a chain-drive model, it may need lubrication or replacement due to wear. Chain drives tend to be noisier, so if you want a quieter option, consider upgrading to a belt-drive or screw-drive opener, which are generally quieter.
Professional assistance is the best idea for a proper installation or the solution of noisy garage doors. Luckily for you, homeyou has the best garage door specialists that will end any squeaking, banging, and grinding sound!
Join the conversation