The general cost of Edmond gutter materials may depend on the type of gutter that will be used and installed. Vinyl gutter which is considered to be the cheapest can cost around $4 up to $8 per piece. Aluminum gutters may cost between $6 and $12 per piece. The good quality steel gutters can cost a homeowner around $11 to $33 per piece. The most expensive which is the copper gutter is priced at around $40 to $100 per piece. Adding cost to the gutter is the downspout extension that usually has to be purchased together with the gutter. A downspout is usually priced at $6 to $15 for a vinyl and aluminum type, steel at around $12 to $30, and the copper which costs $90 or more.
Estimated final cost for gutters
| Item | Quantity | Fair Price |
|---|---|---|
| Roof Gutter Cost | 212 Linear Feet | $882.16 |
| Roof Gutter Labor | 6.4 Hours | $278.21 |
| Roof Gutter Job Materials and Supplies | 200 Linear Feet | $46.24 |
| Totals - Cost to Install Gutters - 212 Linear Feet | $1,206.61 | |
| Average Cost Per Linear Foot | $6.03 |
How will I know if my Edmond gutters need cleaning?
Gutters, like the majority of the different parts of a house, demand occasional maintenance. This translates to cleaning up troughs at least twice every year. If you've observed overflow out of your gutters, they are most likely clogged and have to be cleaned.
What is the best type of hanger to use to install gutters in Edmond?
There are actually two major different kinds of hangers available nowadays. The first type of hangers is referred to as “spike and ferrule” hangers and require a sizable nail or spike which can be driven over the front of the gutter and into the house. Although very strong, these hangers quite often end up in corrosion and they are at the same time extremely tough to remove. The other style of hangers is identified as “hidden hangers.” These are typically mounting brackets which clip into the gutter and then are mounted on the house using a screw. The main advantage of these hangers is that they can be effortlessly installed and modified. One disadvantage is that they are typically not as tough as “nail and ferrule” hangers.
How many downspouts should gutters have in Edmond?
On most houses, it is highly recommended to have an individual downspout for every 20' – 30' of gutter. In certain circumstances, it is possible to drain 40' of installed rain gutter to at least one downspout, but you should attempt to avoid this whenever possible so as to preserve optimum capabilities and performance of the gutter system.