Cost to Top Quality Insulate an Attic in Taylor for the Right Price

$1.3K Cheap
$1.5K Great Price
$1.7K Costly
View Full Cost Chart

There are a lot of insulation types available today. However, when it comes to attic insulation Taylor, blown-in is the most commonly used. It is estimated that the majority of homeowners spend around $700 up to $1,900 to have an average size or 2,500 square feet attic insulated. If you plan to save costs on labor, you can have your attic insulated by doing it yourself. Expect to spend around $500 to $1,000 for a blown-in insulation that has an R-30 value, $100 to $200 for the equipment needed, and $10 to $25 for the sealant. A DIY Taylor attic insulation can cost you approximately $600 to $1,300 all in all.

Estimated final cost for attic insulation

Item Quantity Fair Price
Attic Insulation Cost 1282 Square Feet $572.43
Attic Insulation Labor 14 Hours $795.35
Attic Insulation Job Materials and Supplies 1200 Square Feet $62.36
Attic Insulation Equipment Allowance $40.68
Totals - Cost to Install Attic Insulation - 1282 Square Feet $1,470.83
Average Cost Per Square Foot $1.22

How long does the attic insulation Taylor take?

The completion of an attic insulation project depends on the size and design of your attic plus the material to be used. Generally, it can be done in 2 hours or more.

What are the requirements for an attic insulation Taylor?

Attic insulation requires at least a minimum of R-16 value. This can be achieved by using 300mm roll of blown attic insulation.

Should I have the water pipes and tanks in the attic insulated in Taylor?

Yes. It is important to keep the water pipes and water tanks located in your attic insulated to keep them from freezing during winter.

Find the Best Costs on Attic Insulation - Taylor, 18517

If you do not have any knowledge about home insulation installation, have an attic with uneven joist spacing or attic with limited headroom, it is best to hire a professional for your attic insulation Taylor project. The cost for an insulation project is estimated to be around $1.40 up to $3.60 per square foot. Most contractors charge $70 to $80 per hour. Given these amounts, a 2,500 square feet attic insulation Taylor that is professionally installed can cost you approximately $1,800 up to $4,600. Keep in mind the cost of your project can fluctuate depending on the size of your attic and geographical location. The labor costs can also change based on your area. Expect to pay higher labor fees if you are living in a city. The type of insulation material can also have an impact on the cost of your project. Cellulose material is around $28 to $30 per bag. Fiberglass is estimated to be around $33 per bag, and mineral wool can be purchased for $55 per roll.

Local pros & Availability

Insulation Contractors available in your area

  • Open
  • Closed
  • 1

    G&W Drywall

    Rating: 61
    120 Kimback St. 
    JessupPA  18434
  • 2

    Superior Walls by Advanced Concrete Systems Inc

    Rating: 57
    OlyphantPA  18447
  • 3

    Energy Smart Insulation

    Rating: 89
    610 Spring Street. 
    MoosicPA  18507
  • 4

    USA Insulation

    Rating: 93
    1033 Reeves Street. 
    ScrantonPA  18503
  • 5

    Horn Drywall And Construction

    Rating: 78
    R 316 Sibley Ave. 
    Old ForgePA  18518
  • 6

    Electric Htng Cooling & Insulatn Company

    Rating: 61
    128 Northern Blvd. 
    Clarks SummitPA  18411