How Much Does it Cost to Install a Sump Pump in Darby?

$398 Cheap
$1.2K Great Price
$2.0K Costly
View Full Cost Chart

It has been estimated that most homeowners tend to spend between $700 and $1,700 with an average of $1,100 for their sump pump installation in Darby. Many factors can affect the cost of your Darby sump pump installation such as the type of pump, the kind of flooring that you have, the location of where the pump will be installed, and your geographical location. There are two major types of sump pumps available today: the pedestal sump pump and the submersible sump pump. A pedestal sump pump can last for up to 25 to 30 years and it can cost you around $60 for a conventional 1/3 horsepower pump up to $200 for a ½ horsepower pump. Submersible sump pump, on the other hand, is estimated to cost around $100 to $400 with ¾ horsepower. However, its lifespan can only reach up to 15 years maximum.

Is it ok to use an extension cord to power my sump pump in Darby?

No. Sump pumps deal with flood water. An extension is at high risk of being submerged into water and may cause electrocution. For you and your family's safety, make sure that a dedicated outlet is installed on top of your sump pump. Also, make sure to unplug your sump pump whenever you work on it or near it.

Should I clean my sump pump in Darby?

Yes. It is recommended that sump pumps should be cleaned and maintained at least every 3 to 4 months after installation. This is very necessary, especially if you are using the pump to dispose of water from your washing machine.

Is there any way that I can prevent debris from clogging my sump pit?

Yes. Install a screen to prevent any unnecessary objects from getting into your sump pit.

Find the Best Costs on Sump Pump Installation - Darby, 19023

The type of floor that you have can also have an impact on your sump pump installation in Darby project. The harder your floor is, the costlier it will get because of the difficulty of digging it. If you have cement or concrete floors in your basement, it can cost you around $2,000 to $5,000 in addition to the total cost. Your geographical location also has an enormous impact on the cost of your project. If you are living in the city, you may get charged with $2,000 up to $3,000 for a Darby sump pump installation job. However, the installation may cost lower in rural areas.

Local pros & Availability

Plumbers available in your area

  • Open
  • Closed
  • 1

    Roto-Rooter Plumbing & Drain

    Rating: 83
    DarbyPA  19023
  • 2

    John Gallagher & Sons

    Rating: 93
    1220 MacDade Blvd. 
    CollingdalePA  19023
  • 3

    Mw Donnelly Inc

    Rating: 60
    DarbyPA  19023
  • 4

    Corbett Plumbing & Heating, Inc.

    Rating: 93
    215 Clifton Ave. 
    CollingdalePA  19023
  • 5

    Richard Tripler Plumbing Heating

    Rating: 90
    641 MacDade Blvd. 
    CollingdalePA  19023
  • 6

    Twenty Four Seven Plumbing & Heating

    Rating: 69
    224 Marks Ave. 
    DarbyPA  19023