How Much Does it Cost to Coat a Roof with Rubber in Angleton?

$1.8K Cheap
$2.3K Great Price
$2.7K Costly
View Full Cost Chart

When estimating the cost of applying a rubberized roof coating in Angleton on your rubber roof, you need to consider a few variables. This includes mainly the amount of rubberized roof coating required, the size of the rubber roof, and the labor cost. The cost of a rubberized roof coating in Angleton is estimated to be around $60 to $80 per gallon. 1 gallon of Angleton rubberized roof coating can cover up to 40 square feet of rubber roof. Most retailers and manufacturers also offer the coating in 5-gallon pail. It can cost you around $250 up to $360 and save you $40 up to $50.A 5-gallon pail of rubberized roof coating in Angleton can cover 200 square feet of roof area. If you have a 2,000 square feet or 20 square roof area, you will need 10 5-gallon pails of Angleton rubberized roof coating which can cost you around $2,500 up to $3,600.

Estimated final cost for rubberized roof coating

Item Quantity Fair Price
Membrane Roofing System Cost 1282 Square Feet $1,201.31
Membrane Roofing System Labor 20.1 Hours $764.53
Membrane Roofing System Job Materials and Supplies 1200 Square Feet $233.53
Membrane Roofing System Equipment Allowance $68.55
Totals - Cost to Install Membrane Roofing Systems - 1282 Square Feet $2,267.92
Average Cost Per Square Foot $1.89

How long does it take to finish applying rubberized roof coating in Angleton?

On average, it takes around 2 to 4 hours to apply rubberized roof coating on a rubber roof. However, this may change depending on the size of the roof and the number of the people working on the job.

Will applying rubberized roof coating in Angleton affect the lifespan of the rubber roof?

Definitely. A rubber roof may last for up to 20 to 30 years. It can be extended up to 35 to 40 years with regular application of rubberized roof coating.

What are the available colors for rubberized roof coating in Angleton?

Rubberized roof coating is basically available in two colors, white and black.

Find the Best Costs on Rubberized Roof Coating - Angleton, 77515

EPDM roofs or rubber roofs are sensitive roofing materials. They should be handled by professionals who have enough experience and training when it comes to the installation of the said roofing material. The same goes when you want to apply rubberized roof coating in Angleton. Many homeowners believe that it can be done as a DIY project only to end up disappointed when the flat rubber roof starts to leak when it rains. Rubberized roof coating in Angleton is an added layer that will prevent this from happening and provide extra insulation to your home. If you want to save money, hiring a professional to apply the coating once will cost less than hiring a professional to repair your flat roof in the future or redo the coating application. Roof contractors typically charge $30 to $60 per hour for the application of Angleton rubberized roof coating. On average, it will cost you around $3,000 to $5,000 to get a professionally applied rubberized roof coating in Angleton.

Local pros & Availability

Roofing Contractors available in your area

  • Open
  • Closed
  • 1

    South East Roofing

    Rating: 68
    AngletonTX  77515
  • 2

    Thomas Richie J Ii

    Rating: 73
    319 N Hancock St. 
    AngletonTX  77515
  • 3

    Roofing Professionals

    Rating: 59
    2329 E Mulberry St. 
    AngletonTX  77515
  • 4

    Spray Energy Systems

    Rating: 67
    2111 County Road 428. 
    AngletonTX  77516
  • 5

    Ameripro Contractors, Inc.

    Rating: 75
    600 S Velasco St. 
    AngletonTX  77515
  • 6

    Re-New IT Contractors

    Rating: 74
    506 N Pecan St. 
    AngletonTX  77515