In as much as you will be interested in getting the soapstone countertops Austin installed, you have to think about the cost of getting this done. A brief discussion with your Austin soapstone countertop contractor should help you figure out the probable expense you will incur. You will discuss things like the additional features that you need alongside the installation. Say for example you want to have a thicker soapstone slab than the average slab, fabrications on the edge, seam joints or even a sink cut-out. These are features that will cost more in addition to the work that needs to be done. However, when you discuss it with the contractor, you can be well-prepared for the expense of the Austin soapstone countertops.
Estimated final cost for soapstone countertops
| Item | Quantity | Fair Price |
|---|---|---|
| Quartz Countertop Cost | 215 Square Feet | $12,464.02 |
| Quartz Countertop Labor | 30.4 Hours | $1,102.08 |
| Quartz Countertop Job Materials and Supplies | 200 Square Feet | $483.69 |
| Totals - Cost to Install Recycled Glass Countertops - 215 Square Feet | $14,049.79 | |
| Average Cost Per Square Foot | $70.25 |
How do I clean my countertops?
There are special soapstone cleaners that you can get in the stores. However, this is not necessarily a must-have. For your Austin soapstone countertops, cleaning is easy. You can just use a cloth specifically for that, and some water. However, while you are doing this, you also have to be careful not to have any abrasive cleaners. These can cause some serious damage to your countertops.
Do I need to keep oiling my soapstone countertops Austin?
It is in fact, recommended that you oil the soapstone countertops from time to time. Your contractor will advise you on the nature of oil that should be used for this, the frequency of oiling and how it is to be done. Oiling your soapstone countertops is important in the sense that it will help the stone to darken evenly. When the soapstone darkens, the natural aging process it goes through is enhanced. Remember that oil is not a protectant, and soapstone does not need to be protected either.
Will I have scratches on the soapstone counters?
Naturally and from the normal wear and tear, you can get scratches on your soapstone countertop. However, this is not a bad thing. Most of the scratches can, in fact, be concealed when you apply mineral oil. This will help you get an even tone for the countertops. For deeper scratches, which are less likely to occur, however, the alternative would be to sand them off.