How Much Does it Cost to Install a Sump Pump in Bellevue?

$427 Cheap
$1.3K Great Price
$2.1K Costly
View Full Cost Chart

It has been estimated that most homeowners tend to spend between $700 and $1,700 with an average of $1,100 for their sump pump installation in Bellevue. Many factors can affect the cost of your Bellevue sump pump installation such as the type of pump, the kind of flooring that you have, the location of where the pump will be installed, and your geographical location. There are two major types of sump pumps available today: the pedestal sump pump and the submersible sump pump. A pedestal sump pump can last for up to 25 to 30 years and it can cost you around $60 for a conventional 1/3 horsepower pump up to $200 for a ½ horsepower pump. Submersible sump pump, on the other hand, is estimated to cost around $100 to $400 with ¾ horsepower. However, its lifespan can only reach up to 15 years maximum.

Is it ok to use an extension cord to power my sump pump in Bellevue?

No. Sump pumps deal with flood water. An extension is at high risk of being submerged into water and may cause electrocution. For you and your family's safety, make sure that a dedicated outlet is installed on top of your sump pump. Also, make sure to unplug your sump pump whenever you work on it or near it.

Should I clean my sump pump in Bellevue?

Yes. It is recommended that sump pumps should be cleaned and maintained at least every 3 to 4 months after installation. This is very necessary, especially if you are using the pump to dispose of water from your washing machine.

Is there any way that I can prevent debris from clogging my sump pit?

Yes. Install a screen to prevent any unnecessary objects from getting into your sump pit.

Find the Best Costs on Sump Pump Installation - Bellevue, 98004

The type of floor that you have can also have an impact on your sump pump installation in Bellevue project. The harder your floor is, the costlier it will get because of the difficulty of digging it. If you have cement or concrete floors in your basement, it can cost you around $2,000 to $5,000 in addition to the total cost. Your geographical location also has an enormous impact on the cost of your project. If you are living in the city, you may get charged with $2,000 up to $3,000 for a Bellevue sump pump installation job. However, the installation may cost lower in rural areas.

Local pros & Availability

Plumbers available in your area

  • Open
  • Closed
  • 1

    Affordable Plumbing

    Rating: 58
    BellevueWA  98004
  • 2

    9-1-1 Construction Plumbing

    Rating: 63
    BellevueWA  98004
  • 3

    1st Choice Plumbing

    Rating: 63
    BellevueWA  98004
  • 4

    Aardvark Rooter L

    Rating: 58
    BellevueWA  98004
  • 5

    Advance Plumbing & Heating

    Rating: 61
    BellevueWA  98004
  • 6

    AA Plumbing LLC

    Rating: 59
    BellevueWA  98004