How Much Does it Cost to Pave Bricks in Elm Grove?

$4.9K Cheap
$5.3K Great Price
$5.8K Costly
View Full Cost Chart

Brick pavers Elm Grove can cost between $3 to $20 per square foot. However, its cost can fluctuate depending on the size of the brick, the color, and the design. Rare designs, shapes, and colors tend to be costlier than regular bricks. Red brick pavers can be purchased at $.50 to $6 per brick. Gray colored brick pavers Elm Grove are estimated to be around $.50 to %12 per brick. Dry laid brick paver patio can cost $18 to $25 per square foot. Clay bricks are around $300 to $800 per pallet. Clay bricks are more superior and are more expensive than concrete stones. When choosing a paver solution for your project, decide on whether you want to save cost on installation or you want to save less in future repairs and replacement.

Estimated final cost for brick pavers

Item Quantity Fair Price
Brick Paver Patio Cost 535 Square Feet $1,675.08
Brick Paver Patio Labor 60.8 Hours $3,485.48
Brick Paver Patio Job Materials and Supplies 500 Square Feet $104.41
Brick Paver Patio Equipment Allowance $65.23
Totals - Cost to Install Brick Paver Patios - 535 Square Feet $5,330.19
Average Cost Per Square Foot $10.66

Can I use brick pavers Elm Grove around my swimming pool?

Yes. Brick pavers can be used around pools because they are slip and skid resistant. This will make your pool area safer. Water splashes will be absorbed by the sand in the joints and will not pool on the surface. Brick pavers are also a lot cooler to walk in as compared to concrete during summer time.

What are the types of base that can be used in installing brick pavers Elm Grove?

There are 3 kinds of base that can be utilized depending on the brick paver that you will install. Flexible base is usually composed of gravel, coarse sand or compacted crushed gravel. The semi-rigid base is typically consisting of asphalt concrete. The third one is the rigid base that is from reinforced or non-reinforced concrete slab. It is usually used in mortared brick paving solutions.

Can I install brick pavers Elm Grove over my existing concrete driveway?

Yes. If the concrete is in good condition, brick pavers can be installed on it. To make sure that it can act as a good foundation, all damages like cracks and holes should be repaired to ensure that the surface is flat.

Find the Best Costs on Brick Pavers - Elm Grove, 53122

Installation of brick pavers Elm Grove can cost you between $1000 and $3000 depending on what design, shape and color you use. The pavement, driveway, patio size or location of where you want to install your brick pavers Elm Grove will also add to the cost of your project. You should also consider the labor cost. Professional installation of brick pavers usually run around $70 to $150 per hour. Preparation of the area before installing the brick pavers can also add to the expense of installing brick pavers Elm Grove. Preparation usually involves grass removal, leveling dirt, laying out the edges and pouring of gravel foundation. To save cost on preparation, try to do them on your own if you have the time.

Local pros & Availability

Concrete, Brick & Stone Companies available in your area

  • Open
  • Closed
  • 1

    Dowden Construction

    Rating: 90
    19318 West Main Street. 
    LannonWI  53046
  • 2

    Beyond Construction

    Rating: 58
    PO Box 424. 
    ButlerWI  53007
  • 3

    Adam The Handyman

    Rating: 50
    3725 N. 126th St SUITE D. 
    BrookfieldWI  53005
  • 4

    Wisconsin Foundation Specialists, LLC

    Rating: 87
    17155 Oak Park Row. 
    BrookfieldWI  53005
  • 5

    Americas Best Chimney & Duct Cleaning Limited

    Rating: 62
    0 Fairway Dr. 
    BrookfieldWI  53005
  • 6

    Superior Masonry Builders

    Rating: 79
    12699 W Arden Pl. 
    ButlerWI  53007